DVK90132
MLX90132 Development kit
390129013201
Page 9 of 18
Development kit
Rev 002
May-2012
3.2.3 MLX90132 dll
This DLL allows linking the DVK90132 with the TCL scripts; it has to be placed at the root of the D:/ or C:/
drive:
•
Examples: D:\ strfnfcaplugin.dll or C:\ strfnfcaplugin.dll.
At the beginning of each TCL script the DLL has to be loaded with the command load:
•
Examples: load D:// strfnfcaplugin.dll or load C:// strfnfcaplugin.dll
More information about TCL script can be found on the internet. As it is an open source language there are a
large number of dedicated websites such as
4 Getting started with the DVK90132
The DVK90132 allows very quick and easy evaluation of the MLX90132 NFCIP2 reader IC. By simply
connecting the USB port to the user computer, the DVK90132 will be supplied and Start-up menu appears.
Then the user simply has to select the mode to be used by moving left/right the Joystick on the board (a blue
square shows the mode currently selected) and press on it for selection.
The communication interface UART or SPI is selected with the jumper “SPI <-> UART” at power-up of the
DVK90132. Any change of this jumper after power-up will not have any impact anymore. The selected
communication interface will be displayed at bottom-right side of the LCD screen.
Figure 6: Start-up menu (Standalone/Development mode selection)
4.1 Standalone mode
The standalone mode can be used for quick and easy evaluation; the DVK90132 is continuously sensing the
HF field for presence of any ISO/IEC14443 and ISO/IEC18092 (Felica) compatible transponders and displays
its unique identifier when found.
Figure 7: Standalone mode examples of display
