Melec ADB-2F40B, Инструкция по эксплуатации, Страница: 15 / 45

ADB-2F40B
Instructions Manual
４－２．Setting HOLD CURRENT SELECT switch
A high setting value may cause burn on the
skin due to overheating of the motor.
Do not select a high value beyond the
required.
HOLD CURRENT is set up with the HOLD I. SEL switch.
The ratio of HOLD CURRENT to DRIVE CURRENT can be selected.
The switch is factory-set to [approx 40%].
(1) Set the HOLD I.SEL switch to the ratio of HOLD CURRENT to DRIVE CURRENT
required.
●Relationship between the HOLD CURRENT.
HOLD CURRENT
DRIVE CURRENT
（Factory setting）
● HOLD CURRENT changes relative to DRIVE CURRENT setting.
The ratio of HOLD CURRENT [100%] represents the same as the setting for
DRIVE CURRENT.
● The effective range of the HOLD I.SEL switch varies according to the setting
of the DRIVE I.SEL switch.
● The greater the ratio of HOLD CURRENT grows, the more heat the motor
generates when is on holding-state.
Ratio of HOLD CURRENT（％）
DRIVE I.SEL〔No.A～No.F〕
H1 H2
Ratio of
HOLD CURRENT(%)
HOLD I.SEL switch
ON OFF 50
ON
40
ON OFF
30 OFF OFF
－ ON ON
50
OFF ON
H1 H2
ON
100
OFF OFF
30
OFF ON 40
DRIVE I.SEL〔No.3～No.9〕
HOLD I.SEL switch
Ratio of
HOLD CURRENT(%)
H2 H1
ON ON
OFF OFF
OFF ON
ON OFF
× 100
100
50
－
40
＝
DRIVE I.SEL〔No.0～No.2〕
Ratio of
HOLD CURRENT(%)
HOLD I.SEL switch

-15-