10
1.
Plug in and switch on the power.
2.
Lower the appliance into the food, and press the on/off button (2).
3.
Switch off by releasing the on/off button when finished blending.
4.
Wait until the blade (4) has come to a complete stop before removing the appliance from
the food.
NOTE:
Do not leave the appliance running non stop for more than 30 seconds at a time.
Never use the appliance for boiling liquids or very hot foods. Make sure that the food has a
sufficiently low temperature to avoid burning/scalding in case of skin contact.
CLEANING
When cleaning the appliance, you should pay attention to the following points:
Remove plug from the mains socket, and allow the appliance to cool down before
cleaning it. Do not immerse the motor unit (3) into water.
Do not allow water to enter the motor unit.
Clean the motor section by wiping it with a damp cloth. A little detergent can be added if the
appliance is heavily soiled.
Clean the blades and lower part of the appliance by rinsing them under running water.
Do not use scouring pads, steel wool or any form of strong solvents or abrasive
cleaning agents to clean the appliance, as they may damage the outside surfaces of
the appliance. Avoid touching the blade at the bottom of the appliance when cleaning
it!
Ensure the appliance is clean and dry before storing.
Do not use the appliance if :
if the appliance has been interfered with
if the appliance has been mishandled, subjected to rough treatment, or has
suffered any other form of damage
if the appliance is faulty due to faults in the electricity supply.
Due to the constant development of our products in terms of function and design, we
reserve the right to make changes to the product without prior warning.
Voltage : 220 - 240V
Frequency: 50 Hz
Power consumption: 170W
USING THE APPLIANCE
TECHNICAL DATA
