12
COOL FUNCTIONS
1)
B-LINK can be paired with two mobile phones at the same time.
If b-linkI was previously paired to one mobile phone, it is possible to be paired with
a 2nd mobile phone: restart B-link (switch off and switch on) to enter pairing mode;
repeat the above pairing procedure to pair B-link with the 2nd mobile phone; and then
reconnect i7 with 1st mobile phone; finally two mobile phones connect with B-link
successfully.
2) If B-link connects with your iPhone, you can see the battery meter automatically
display on the status bar, so you can know better when B-link should be charged.
> Paired to a mobile phone, it is possible to make and receive calls as using a Bluetooth headset.
Thanks to the buttons on B-link side, it is possible to play, pause and select previous
and next songs on the paired device. The volume control on B-link affects both jack
and Dock output.
1) To play music press shortly the button (1), when music is playing the LED (2) turns
on in blue.
2) To adjust the volume hold at least for 2 seconds the volume button “ + ” (3) to
increase it (until you hear a long tone means the maximum volume) or hold at least
for 2 seconds the volume button “ - ” (4) to reduce it (until you hear a long tone
means the minimum volume).
3) To move to the next song in your playlist press shortly the button “ + ” (3). To
move the previous song in your playlist press shortly the button “ - ” (4).
4) To stop the music press shortly the button (1). The LED (2) flashes in blue every 3
seconds.
5) It is even possible to control all the functions previously explained from the pai-
red device, if supported.
WARNING: Before using I-BLUE II to play the music without wearing the earphones or reducing the
volume of the stereo system, in order to be sure that is not to too loud to avoid ear damage.
PLAYING MUSIC
