Melbourne MTC-10643, Руководство пользователя

Страница: 12 / 18

12
SECTION 5:
TROUBLESHOOTING
Ensure the blade is sharp
Tear-out
The spokeshave leaves tracks on a board’s surface
The blade ‘chatters’
The first step of any troubleshooting is to ensure that blade is sharp.
If sharpening the blade does not resolve the issue please see below for further
suggestions.
•
Most often caused by shaving against the grain – try shaving in the
opposite direction
•
If it is not possible to shave with the grain due to the nature of the design or
difficult grain, take the lightest cut possible with a freshly sharpened blade.
•
Examine your blade for damage and sharpen if required
•
If the tracks occur at the corners of the blade when you are shaving a
broad, nearly flat surface (such as a paddle) you may want to round the
corners of your blade with a diamond or oilstone.
•
Ensure the blade is sharp
•
Reduce the depth of cut
•
Hold the spokeshave at an angle to skew the cut, reducing the effective
cutting angle
•
Lubricate the sole with wax or oil.