Operating Manual MELAdoc label printer
9
Inserting the label roll
Opening the label printer
Press the black release button (see page 8,
overview, B)) located on the housing and
open the upper section of the label printer
backwards.
Inserting the label roll:
1. Remove the new label roll from its
packaging; extend around 18 cm and
dispose of the first 12 labels.
2. Push the roll into the bracket until it clicks
into position.
3. Lay the free strip over the label guide and
extend it c. 15 cm. The first label on the
strip must finish directly on the guide. To
ensure an improved grip at this point, kink
the strip (see detail left) and hold it in
position whilst closing the top section.
bracket
