Operating Instructions
Monitor
24.1306.500.099
Features
The colour TFT LCD monitor is designed for automotive rear view system.
• You can use the system by a 12V or 24V DC car battery.
• When vehicle is turned on, monitor is in “Power off” situation. Press “CAM Select” button lightly to
power on, press again to realize selection between Cameras (CAM1 and CAM2), press and hold it
more than 2 seconds to power off (Stand by) then monitor.
• CAM1 is always in highest priority.
• 1.5 seconds trigger-off delay.
• You can choose CAM1 and CAM2‘s image by triggering wire or “CAM Select” button.
• When trigger is cancelled, it will go back to last memory image.
Monitor controls
•
CAM select
(ON-OFF)
•
Mir/Nor
(picture will be reversed / will not be reversed )
•
Menu
•
Day/night sensor
1) CAM Select
This button is combined with CAM Select and power on/off
function. Press the button lightly to activate Camera 1 to see
the reversing Image. Press the button lightly again to go back
to the image of previous memory camera. Press the button
longer than 2 seconds, the function of power off/on will be
activated.
2) Contrast Control
Adjust the contrast control for the desired overall best picture.
Press the “MENU“for the
CONTRAST
on screen display and
press + or - to increase or decrease the picture contrast.
3) Bright Control
Adjust the bright control for the best overall picture or display brightness.
Press the “MENU“for the
BRIGHTNESS
on screen display and
then press + or - to increase or decrease the picture contrast.
Surround vision for surround safety.
Menu
Day/night
sensor
CAM Select
Mir/Nor