MEITRACK MT90G User Guide
Copyright © 2015 Meitrack Group All rights reserved.
- 9 -
3.
This operation is only for customers in China.
4.
Install the battery.
Insert the contacts side of the battery first and then
gently push the battery cover downward until it locks
into place. Then fasten the two screws on the back
cover.
5.
Charge the battery.
To charge the battery, connect the device to the wall
charger or a computer through the USB cable. When
you use the device for the first time, you are advised to
turn off the device and then charge the battery for 8
hours.
Note: Do not remove the battery unless necessary
during charging. While charging, the device may heat
up. This is normal and does not affect your device’s
lifespan or performance. If the battery is low, it may
affect positioning and data transmission. So you need
to charge the battery before using.
Charge with the travel adapter:
Open the cover of the multifunctional jack of the
device. Plug the small end of the adapter into the
multifunctional jack. Then plug the larger end of the
travel adapter into a power outlet.
Note: Incorrect connection may cause serious damages
to the device. Any damage caused by misuse is not
covered in the warranty.
