MEITRACK MD500S MDVR User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 18 -
Connect your mobile phone to the device's WiFi hotspot.
On the WiFi settings page of your mobile phone, connect the mobile phone to the device's WiFi hotspot.
Note:
1
、
ACC needs to be activated when APP connects to MD500S.
2
、
When app is connected to MD500S WIF, the device will drop the line.
4.7
Installing the Camera of the DMS
The steering wheel of trucks and buses is low, so you should install the DMS on a higher location around the dashboard. It should
not be higher than the driver's eyes, and the angle between the installation location and the driver's face should not be higher than
30 degrees. Please ensure that the distance between the lens and eyes ranges from 60 cm to 90 cm. It is recommended that the
angle between the installation location and the driver's face should not be higher than 30 degrees.
If the DMS is installed into a car, you have to install it on the left or right position of the steering wheel. Because the steering wheel
