MEITRACK K211G GPS Smart Lock User Guide
Copyright © 2018 Meitrack Group All rights reserved. - 12 -
Operation steps:
1.
Install the USB driver and Meitrack Manager.
2.
Connect the device to a computer by using the USB cable.
3.
Run Meitrack Manager (6.0.0.9 version or later), then the following dialog box will appear:
4.
Turn on the device, then Meitrack Manager will automatically detect the device model and the parameter page
will appear accordingly.
For details about Meitrack Manager, see the
MEITRACK Manager User Guide
.
6.5
Binding or Unbinding the T399G
6.5.1
Binding the T399G
To make the K211G and T399G communicate with each other via LoRa, bind the two devices. An IMEI number is the
default binding information.
Perform the following steps to bind the T399G:
1.
Go to the
Peripheral
page of Meitrack Manager.
2.
Enter the IMEI number of the T399G.
3.
Click
Binding
.
4.
Click
Set
.
After the binding is successful, the IMEI number of the T399G will displayed on the
GPS Smart Lock Information
area.
Note: To establish LoRa communication between the K211G and the T399G, the two devices must be bound each
other. Please connect the T399G to the computer, and then repeat the above operations to bind the K211G.
