Connecting & Operating the
MA-2
USB Audio Input:
1. First, use only well-sheilded certified USB 2.0* cables to connect the MA-2’s USB
Audio input to any USB digital audio source component (computer, laptop, media
server etc.)
2. The MA-2’s USB Audio interface uses the B-type USB connector similar to connectors
used on printers. Please see image below:
3. Select the USB Audio input using front panel input selector buttons.
4. For MAC OSX systems, no driver is needed. OSX has the appropriate USB driver
already installed.
5. For Windows XP, Vista (32 or 64bit) and Windows 7 (32 or 64bit) systems install the
provided USB driver located on the software CD in folder named “Meitner MA-2 USB
Audio Driver” and run the “setup.exe” file. Read and follow the installation instructions.
6. Kernal, ASIO and WASAPI (Vista and Windows 7) drivers will be installed.
*Not using proper cables will cause audio issues between digital source and DAC.
016
Connecting & Operating the MA-2
meitner
© 2012 Meitner Audio, All Rights Reserved. Meitner Audio reserves the right to amend specifications & design without notice.
MA-2 Integrated Playback System
