5
Real Time Clock and Day:
•
Press the SELECT button - CLOCK SET will flash.
•
Press the (+) or (-) buttons - the hours will flash.
•
Adjust the hours using the (+) or (-) buttons.
•
Press the SELECT again - minutes will flash.
•
Adjust the minutes using the (+) or (-) buttons.
•
Press the SELECT again to return to normal display
mode.
•
Press the ON/SEND button to send information to the
thermostat.
Timer:
IMPORTANT: If no button is pressed for 10 seconds the display will return to normal
display mode.
Start Time:
•
Press the SELECT button twice - PROGRAM & START
(flashing) will appear on display.
•
Press the SELECT button - the hours will flash.
•
Adjust the hours using the (+) or (-) buttons.
•
Press the SELECT button - the minutes will flash.
•
Adjust the minutes using the (+) or (-) buttons.
Stop Time:
•
Press the SELECT button - PROGRAM & STOP (flashing)
will appear on display.
•
Press the SELECT button - the hours will flash.
•
Adjust the hours using the (+) or (-) buttons.
•
Press the SELECT button - the minutes will flash.
•
Adjust the minutes using the (+) or (-) buttons.
•
Press the SELECT button - the TIMER will blink
•
Select TIMER ON or OFF Using the (+) or (-)
buttons.
•
If you changed between TIMER ON or OFF, the
SEND will blink.
•
Press SEND/ON button to send the information to
the thermostat.
•
If you did not change between TIMER ON or OFF,
press the SELECT button to return to normal display mode.
Important: when the Timer is active, and there is power failure to the thermostat,
the display will show “ON” flashing.
