This device is not designed to be used
by people (including children) with limit-
ed physical, sensory or mental capaci-
ties or those without experience and/or
knowledge. Children should be super-
vised to ensure that they do not play
with the device.
This device may not be used by chil-
dren.
1 Work area
a
Keep work area clean and well lit.
Cluttered and dark areas invite acci-
dents.
b
Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust.
Power tools create
sparks which may ignite the dust or
fumes.
c
Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
2 Electrical Safety
a
Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools.
Unmodified plugs and match-
ing outlets will reduce risk of electric
shock.
b
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or
grounded.
c
Do not expose power tools to rain
or wet conditions.
Water entering
a power tool will increase the risk of
electric shock.
d
Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts.
Damaged or
entangled cords increase the risk of
electric shock.
e
When operating a power tool out-
doors, use an extension cord suit-
able for outdoor use.
Use of a cord
suitable for outdoor use reduces the
risk of electric shock.
3 Personal safety
a
Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence of
drugs, alcohol or medication.
A
moment of inattention while operating
power tools may result in serious per-
sonal injury.
b
Use personal protective equip-
ment. Always wear eye protection.
Protective equipment such as dust
masks, non-skid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
c
Prevent unintentional starting.
Ensure the switch is in the off-po-
sition before connecting to power
source and/or battery pack, pick-
ing up or carrying the tool.
Carrying
power tools with your finger on the
switch or energising power tools that
have the switch on invites accidents.
d
Remove any adjusting key or
wrench before turning the power
39
5402270-Schlagbohrmaschine_man.indd 39
5402270-Schlagbohrmaschine_man.indd 39
13.08.20 06:45
13.08.20 06:45
