8 Starting of Operation
Host Key Verification
To enable a secure connection to the system via SSH,
you must add the key used to your known hosts. This
ensures that this device can be permanently identified
as a trusted communication partner.
To confirm, click on
Yes
.
8.1.1 Connecting with the Network Configuration Wizard
The "Network Configuration Wizard" allows you to connect to your microSync system.
Start the Network Configuration Wizard
You will find the wizard in the Section 4 of the start screen on the bottom right. This opens by clicking on the
button. The configuration is explained step by step.
MAC Address
Enter the 12-digit MAC address located on your Mein-
berg module. Then confirm the entry with "Next" to
continue.
Hostname
Enter any host name for your system or leave the field
blank. Then confirm the entry with Next to continue.
Static IP or DHCP
In the next step you can determine whether you want
to enter the IP address manually or whether a DHCP
server should assign the IP address automatically.
Static IP
Enter the IP address, netmask, gateway and DNS
server into the fields. Then confirm with Next to con-
tinue.
DHCP Client
The DHCP client is activated. Click Next to continue.
When assigning the IP address via the wizard, the following must be observed:
•
PC and the corresponding system must be physically connected in the same network.
•
IP configuration via a gateway/router is not possible.
•
A forwarding of broadcast packets in the network is usually blocked or not allowed.
microSync
Date: 17th June 2020
33
