6.5 Terminal
To connect a serial terminal (according to the device
model), use the RJ45 connector of the LAN-CPU. Via
the serial terminal connection it is possible to con-
figure parameters with a command line interface. You
have to use a CAB-CONSOLE-RJ45 cable to establish
a connection to your PC or Laptop computer. You can
use e.g. the standard Hyperterminal program shipped
with your Windows operating system. Configure your
terminal program with 38400 Baud, 8 Databits, no
parity and 1 Stopbit. The terminal emulation have to
set to VT100. After connecting to the timeserver there
will be displayed the login message (press RETURN
for first connection:
(default user: root; password: timeserver).
CONSOLE
38400 / 8N1
DCD_IN
RXD_IN
TXD_OUT
GND
3
4 + 5
6
7
6.6 USB Port
All devices of the LANTIME M-Series dispose a USB
interface, which can be used to plug in a USB Stick.
The USB Stick can be deployed for the following tasks:
•
to lock the keys on the LC-Display, to prevent
unauthorized access
•
to save the LANTIME configuration
•
to transfer the configuration between several
LANTIMES
•
to save log files
USB
6.7 GPS Antenna
Cable:
shielded coax
Cable Length:
max. 300m to RG58,
max. 700m to RG213
Connector:
BNC female or N-type female
Input GPS:
Antenna circuit
1000 V DC insulated
Local Oscillator
to Converter Frequency:
10 MHz
1
First IF Frequency:
35.4 MHz
1
1) these frequencies are transfered via the antenna cable.
Power Requirements:
12V ... 18V, 100mA (via antenna cable)
GPS
Antenna
GPS
Antenna
BNC
N-Norm
N-type
10
Date: 5th April 2018
LANTIME M400
Содержание LANTIME M400
Страница 1: ...TECHNICAL REFERENCE LANTIME M400 GPS LNE 5th April 2018 Meinberg Radio Clocks GmbH Co KG...
Страница 2: ......
