Meinberg IMS-VSG181, Руководство по установке

Страница: 6 / 29

3 Introduction
3 Introduction
This Setup Guide is a systematically structured guideline to assist you with the set-up of your Meinberg product.
The IMS-VSG181 is used to provide a reference video or audio signal for studio equipment, with generated sig-
nals output through four BNC outputs. These respectively output a bi-level sync (black & burst)/tri-level-sync
signal, a linear time code (LTC) signal, a Digital Audio Reference Signal (DARS), and a word clock signal.
To ensure that the output signals remain highly precise even when switching between clocks using the RSC
module (in IMS systems with receiver redundancy), the IMS-VSG181 may be fitted with its own oscillator.
Features
.
The IMS-VSG181 is synchronized against an external reference frequency (10 MHz), a pulse-per-second signal
(PPS), and a time string from an upstream clock. These synchronization signals are essential to maintaining
the precision of the output signals. The Web Interface provides a wide range of adjustment and customization
options for all output signal types. The signal outputs are phase-matched with the PPS signal.
Please refer to the LANTIME Firmware Manual for a more detailed description of all of the status moni-
toring configuration options and features available for your Meinberg product.
LTOS7 Firmware Manual Download:
http://www.mbg.link/docg-fw-ltos
Compatibility
The IMS-VSG181 is an IMS module that is compatible with the following systems in the IMS product family
and can be used in the following slots.
PWR CLK CPU MRI ESI I/O
M500 M1000 M1000 S M2000 S M3000 M3000 S M4000
System-Kompatibilität - IMS VSG181
IMS-System
Kompatibel
Einsetzbar
IMS-Slot
Slot-Kompatibilität - IMS VSG181
To eliminate any risk of compatibility problems, your IMS system should have at least LANTIME OS Version
7.04 installed.
IMS-VSG181 Date: March 1, 2022 3