Meinberg IMS SCG180-B, Руководство по установке

Страница: 5 / 11

2 Safety Instructions for hot pluggable Modules
Check before every maintenance work on the system:
•
If a data backup is required?
•
Is a backup required, verify the data recovery which is done by this backup.
•
Make sure to avoid any static discharge while working - use a grounding cable and/or antistatic gloves
during installation and removal of hot pluggable components.
• If you are replacing a hot pluggable power supply, unplug the power cable prior to removing the module
from the case.
• Never open a power supply. In power supplies dangerous voltages can still remain even after disconnection
from the power supply. Always send power supplies back to the manufacturer for maintenance.
Exchange of hot-swap components
•
Ensure that components which will be replaced during operation, always be treated with the utmost care.
Avoid contact with live components.
•
Electrostatic discharge can damage electronic components. For this reason, ensure protection against
electrostatic discharges by wearing anti-static shoes while working with the system.
•
Take care when removing and installing the hot-plug modules. Always work with the utmost caution.
Touch the modules only at the edges.
• Place the module out of the box or after removal from the system with the component side to the top on
a grounded and static-free surface.
• Storage of an IMS module must be done in a dry place.
•
Installation or removal from hot-swap components only by authorized personnel!
2 Date: 7th June 2018 IMS SCG180-B Setup Guide