Meinberg IMS-PZF Clock, Руководство пользователя

Страница: 18 / 19

6 PZF Clock
6.1 Menu Clock in the Web Interface
The initial start of operation of the clock and all other settings can be done via the web interface.
Depending on the receiver configuration of the system, i.e. whether it is a single reference clock or a system
with two installed radio clocks and a signal cswitchover module (RSC), the web interface is set up accordingly.
This also applies to the type of reference signal and its options. If the receiver configuration is redundant,
the general settings for "IRIG In/Out", "Serial Ports", "Time Zone", "Enable Outputs", "Programmable Pulses" and
"Synthesizers" appear in the "RSC switch card" menu.
For PZF receivers, the distance to the transmitter (Frankfurt/Mainflingen) should be entered in the "Mis-
cellaneous" submenu so that the PZF clock can compensate the signal transmission time.
PZF Receiver State
The current status of the clock can be monitored in the submenu "Receiver information".
Detailed information about the LANTIME web interface can be found in the current firmware manual, which
can be downloaded from our website:
https://www.meinbergglobal.com/english/docs/
IMS-PZF180 Setup Guide Date: 31st January 2020 15