Meinberg IMS LANTIME M3000, Руководство пользователя

Страница: 65 / 139

12 Attachment: Technical Information
12.7.10.1 RSC180 - DIP Switch
Various modes of the board can be additionally configured by an on-board DIP-Switch.
Configuration of a DIP-Switch
SW NAME Description
————————————————————————————————————————
1
DIS_ENA enable / disable activation of signals if both clocks are async
2 DIS_MAN enable / disable a manual override by front panel switches
3 DIS_REM enable / disable the remote control
4 FUNCTION RSC board functionality: either in an IMS system or LAN interface is activated
5 Reserve
6 Reserve
7 Reserve
8 DIS_MST enables / disables the priority master clk selection
9 Clk1_Clk2 selects between the priority master clk 1 or clk 2
10 EN_CLK activates the clock with a sync event after reset (only if DIP 1 is ON).
Figure: DIP-Switch of RSC180
Description of DIP_SW positions:
Switch No. 1. Positions:
(0)
OFF: In the case that both clock are async, all output signals are disabled.
(1) ON: Even if both clocks are async, outputs are activated from one of the clocks.
Switch No. 2. Positions:
(0)
OFF: Front panel switch functions activated.
(1) ON: Front panel switch functions disabled.
Switch No. 3. Positions:
(0)
OFF: Remote control activated.
(1) ON: Remote control disabled.
Switch No. 4. Positions:
(0)
OFF: The RSC board is used in an IMS system.
(1) ON: LAN Interface is activated.
Switch No. 5-7 Reserves.
Switch No. 8. Positions:
(0)
OFF: The Priority master mode is disabled.
(1) ON: Priority master mode is enabled.
IMS - LANTIME M3000 Date: 2nd July 2020 59