manualshive.com logo in svg

Meinberg GPS163AHS, Руководство по эксплуатации

Поделиться
Скачать
Meinberg GPS163AHS Скачать руководство пользователя страница 12

12

The front panel layout

FAIL LED

The FAIL LED is turned on whenever
the receiver is not synchronous to the
GPS-system.

LOCK LED

The LOCK LED is turned on if the re-
ceiver has acquired at least four satelli-
tes and has computed its position after
power-up. In normal operation the re-
ceiver position is updated continuously
as long as at least four satellites can be
received. When the receivers position is
known and steady only, a single satellite
needs to be received for synchronizati-
on and generatation of output pulses.

OCx LEDs

The LEDs OC1, OC2 and  OC3 are indicating the status of the corresponding pulse
output. A burning LED symbolizes the ON-state of an optocoupler.

BSL Key

Whenever the on-board software must be upgraded or modified, the new firmware
can be downloaded to the internal flash memory using the serial port COM0. There is
no need to open the metal case and insert a new EPROM.

If the BSL key behind the front panel is pressed during operation, a bootstrap-

loader is actived and waits for instructions from the serial port COM0. The new
firmware can be sent to GPS163xHS from any standard PC with serial interface. A
loader program will be shipped together with the file containing the image of the new
firmware.

The contents of the program memory will not be modified until the loader program

has sent the command to erase the flash memory. So, if the BSL key is pressed
unintentionally, the firmware will not be changed accidentially. After the next
power-up, the system will be ready to operate again.

GPS163DHS

COM 0

COM 1

GPS

Ant

DCF

Lock

Fail

BSL

Ub

Oc 1

Oc 2

Oc 3

+

+

+

+

-

-

-

-

Out

Содержание GPS163AHS





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды