Meinberg DCF77 PCI32, Руководство по эксплуатации

Страница: 10 / 20

10
Copying the distributed Software to the Hard Disk
When the computer has come up after power on the utility programs should be copied
from the shipped diskette to a subdirectory on the hard disk. Assume the current drive
is C: and the new subdirectory is to be created on the current drive, create that
subdirectory (e.g. called MEINBERG) using the command
MD \MEINBERG
from the DOS command line. Make the new subdirectory the current one using the
command
CD \MEINBERG
If the utility diskette is inserted in drive A: use the following command to copy the
files and subdirectories from the diskette to the hard disk:
XCOPY A:*.* /S
Using PCPSINFO.EXE
After the board has been installed in the computer the program PCPSINFO.EXE
should be run in order to see if the board has been properly installed. This program can
display its messages in English or in German language and the date and time in
formats used in the USA, the UK, or Germany. The default language and formats used
are derived from the DOS country code at startup. If automatic language detection
does not yield the desired result, you can force a language and date/time format using
a command line parameter or by pressing a function key when the program is running.
The command syntax is shown below:
PCPSINFO [C:xx] [MONO] [?]
Usage of the command line parameters is described below:
C:xx Country code override. The default country code to be used is derived from the COUN-
TRY=.... entry in the CONFIG.SYS file.
xx may be set to 49 (Germany, 24h clock, dd.mm.yy), 44 (U.K, 12h clock, dd/mm/yy)
or 1 (USA, 12h clock, mm-dd-yy).