MeiLing BCD-446W, Инструкция по эксплуатации

Страница: 22 / 23

Normal phenomena
Maintenance
Low voltage
,
the compressor can
'
t start
You should purchase pressurizer of more than 1000W
when the area of the appliance installation
,
that
'
s better to
protect your fridge
.
Long time to start
When the ambient temperature too high, it will take long time
to start the appliance
.
Button failure
Please check the control board whether the fridge under
lock mode
.
When under lock mode
,
all buttons can
'
t work
.
Dew drops
When external air flows into the cool inner surface of the
fridge
,
dew drops can be formed
.
If the humidity of the installed location is high or during
the rainy season
,
dew drops can form on the outer side
of the fridge
.
This is a natural phenomenon that occurs
during the humid weather
,
Wipe the water drops with a
dry cloth
.
Noise
When you operate the fridge for the first time
,
the fridge
will operate at high speed to cool fast and the sound can
seem louder
.
When the internal temperature falls below a
certain level
,
the noise will subside
.
When the operation of the compressor is starting or
ending
;
various parts expanding
/
contracting or various
control devices operating or temperature change within
the fridge
,
you will hear the sounds
,
these are normal
sounds
.
Compressor hot
When working
,
the temperature of the compressor is
more than 80
℃,
please do not touch the compressor
,
it
may cuase serious injury
.
outer
Compressor long time running
When the ambient temperature too high or put too much
fresh foods into the fridge
,
it will take long time to cool
down until the appliance run at the setting temperature.
Middle beams feel hot
Middle beams feel hot after a period of time of the appliance run
,
it belongs to the normal phenomenon.
20