Mounting the ME-Synapse into 19“ racks
To mount the ME-Synapse into a 19“ systeme a mounting kit (available as optional accessory) is required. The kit
includes 2 angular guidance plates and a front panel. To mount the guidance plates, screw out the 4 screws on
the ME-Synapse top side. Use the 4 screws to fix the guidance plates to the ME-Synapse top side, as shown in
the picture below.
To mount the front panel, screw out the 4 screws on the ME-Synapsen front side (the side with the slots for
DAQ boards). Use the 4 screws to fix the front panel to the front side of the ME-Synapse. Now the ME-Synapse
is ready for 19“ systems, using standard rails as shown in the picture below.
Picture shows ME-Synapse-USB -
ME-Synapse-LAN analog
ME-SynapseExpress.indd 11
03.05.12 15:50
