- 4 -
Chapter 4 Function Introduction of Each Part
4.1 Name and Function for Each Part of the WiFi Camera Eyepiece
1. Female interface: connected with the eyepiece end of biological microscope.
2. Fastening screws: tighten the screws with the hexagon key to fix the eyepiece end of the biological
microscope.
3. Male interface: it is connected with the objective lens end of biological microscope.
4. ACT indicator light: when connect it via. WiFi, the blue light here flashes to start signal transmission.
5. Power on/off:
1) Switch to left : OFF ; the in WiFi Camera Eyepiece will stop working.
2) Switch to middle: USB Working mode. It will allow the in WiFi Camera Eyepiece connect to PC
via. USB cable.
3) Switch to right :WiFi Working mode. It will allow the inWiFi Camera Eyepiece connect to smart
phones/tablets via. WiFi.
6. Power indicator:
1) When the power is off, the red light is always on.
2) When switch to USB or WiFi working mode, the yellow light is always on.
7. USB Cable:
1) When switch to USB working mode, the USB cable is used to tansimission data to PC.
2) When switch to WiFi working mode, the USB cable is used to powered by USB power plug.
8. WiFi antenna: enhance WiFi signal.
9. Focusing screw: turn the screw with hexagonal key to adjust the focal length.
10. Reset hole: the default settings can be restored by pressing with reset pin for 8-12 seconds.
HD-UWF User’s Manual
Meiji Techno America
meijitechno.com
