7
HDZ7000TS
Series
2-2
Assembling Steps
2-2-1
Assemble the Microscope Body
1) Match the dovetail interface
①
of the
microscope body with the dovetail groove
②
of the focus bracket group, and insert it from
top to bottom as the direction shown in the
figure, fix the screw in the screw groove.
2) Tighten the M4 inner hexagon screw on the
body group
③
with a M4 inner hexagon
spanner (side length 2mm).(See Fig.1)
2-2-2
Assemble the LED Ring Light
1) Move the LED right light close to the
microscope body according to the arrowhead
direction, align the three screw holes
①
with
the thread groove
②
, and lock the screw with a
M4 inner hexagon spanner (side length 2mm).
(See Fig. 2).
2-2-3
Connect the Power Cord
1) Insert the external adapter plug
①
into
the power supply adapter socket
②
of the
microscope body to the bottom, and the power
will be switched on. (See Fig. 3)
★
Don’t use strong force when the power
cord is bended or twisted, otherwise it will
be damaged.
★
Use the special wire supplied by our
company. If it’s lost or damaged, choose
an external power adapter with the same
specifications (power cord/charger).
Fig. 1
Fig. 2
Fig. 3
