6
S
ZG series
3-7 Mount and remove micrometer
⑴
Take off the mounting ring from eyepiece. (Fig. 8)
⑵
Clean the micrometer and mount it into mounting ring,
make sure the inscription side up. (Fig. 8)
⑶
Mount the mounting ring into eyepiece.
⑷
To remove the micrometer, please take off the mounting
ring first. Then take out the micrometer and wrap it with
clean and soft paper for storage.
3-8 Set photo device & TV device
⑴
Screw video tube
①
into M28 hole of tri-tube. (Fig. 9)
⑵
Loose the lock-screw
②
on TV tube, and take off the
C-mount
③
from tube.
⑶
Screw the C-mount into video camera.
⑷
Connect the video camera with TV tube and lock by
screw
②
.
3-9 Select light path
⑴
To observe through binocular, please turn the light path
selection lever
①
to “OUT”. (Fig. 10)
⑵
If turn the light path selection lever
①
to “IN”, (Fig 10) ,
you can observe through both binocular and trinocular.
★
Whether the light path is to “OUT” or “IN”, please make
sure it is to the end.
3-10 Focus TV device
⑴
Turn the light path selection lever to “IN”. (Fig 11)
①
Turn the zoom knob to the Max. magnification and
⑵
observe through video camera and adjust focusing knob
to make image clear.
⑶
Turn the zoom knob to the Mix. Magnification. If the
image is not clear, please adjust the adjusting ring
②
on
video tube to make it clear.
Turn the zoom knob to Max. magnification again. If the
⑷
image is still not clear, please repeat the step (2), (3) to
make it clear within the whole zoom range.
Figure 8
Figure 9
Figure 11
Figure 10
