22
8. REMOTE CONTROL
8.1 Optional Products
1. Lens/ IR Illuminator/ Bracket
2. Monitor
3. Remote Control
8.2 Lens/ IR Illuminator/ Bracket
Please refer to the manual for more reference.
8.3 Monitor
Please refer to the manual for more reference.
8.4 Remote Control
1. Please refer to the manual (4.1 Button Function) for button
function reference (
NOTE 1
).
NOTE 1: IR/LCD button may function separately without using the function
button.
2. Remote Control Synchronization.
①
.
Enter menu and select item
【
POWER ON SETUP
】
, setup
R/C FUNC to <ON>, and then press
《
/
∩》
button to
return to previous menu selection.
②
.
Enter menu and select item
【
POWER ON SETUP
】
, and
setup a set of serial number for R/C ID.
③
.
Enter menu and select item
【
POWER ON SETUP
】
, setup
R/C ADJUST to <START> to enter SYNC mode and wait
for the remote control signal
(NOTE 1)
.
④
.
Press
《
FUNC
》
+
《
MENU
》
button to enter SYNC function
(
NOTE 2
).
⑤
.
LED light flashes for 1 sec. indicates that the SYNC function setup
is complete.
⑥
.
Enter menu and select item
【
POWER ON SETUP
】
, setup
R/C FUNC to <STOP> to stop SYNC function.
⑦
.
Test whether the remote control is able to control the main
device. If the setup failed, please repeat step
○
2
~
○
6
again.
NOTE 1:
To exit item R/C SYNC, setup the item to <STOP>.
NOTE 2: Synchronization allows only one single device to be controlled by
a single remote control.
NOTE 3: Remote control power consumption is similar to a wireless mouse.
NOTE 4: User switching Remote Controller power ON when the device (switched
OFF) is not in use, results internal RF signal being constantly active and
consumes power even in the standby mode. The Lithium battery with the
remote controller function switched ON lasts about 2days and with the
remote controller function switched OFF last about 15 days (battery
standby time depends on the frequency of use and its life span).
