33
DIAGNOSTIC Screen -
This screen will reveal various situations that have been detected and need to
be corrected. See Troubleshooting, Section 7, for further information on diagnostic readouts.
WARNING Screen -
Warnings consist of high temperatures, AC/DC breakers open, low battery charge,
and UPS in BYPASS mode.
5.3.4 MANUAL BATTERY TEST Screen
This screen shows the results of the last manual battery test that was performed along with the option
of performing a new manual battery test.
Items displayed include the date and time of when the last test was performed, how long the test lasted
(in minutes and seconds), and the result of that test. The result will display one of several messages. If
the test completed the desired time duration without encountering a problem, “TEST PASSED” will be
displayed. If the test encountered a problem with the batteries, either “FAIL-WARNING” or “FAIL-
DIAGNOST” will be displayed. The “FAIL-WARNING” message indicates that the charge percentage
dropped below 20% during the test. This indicates that your battery capacity is greatly reduced and
your batteries should be changed in the very near future, as the UPS is capable of only supporting your
load for a short time should a power failure occur.
The “FAIL-DIAGNOST” message is the more serious of the two messages because it indicates that
your batteries have very little or no capacity, probably not enough to support your load for even a very
0 1 / 1 1 / 9 9 D I A G N O S T I C A L A R M ! 1 6 : 5 2 : 1 1
D C L I N K / B A T T E R Y P R O B L E M
P R E S S < A L A R M R E S E T > T O E S C A P E
0 1 / 1 1 / 9 9 W A R N I N G A L A R M ! 1 6 : 5 2 : 1 1
A C B R E A K E R I S O P E N
P R E S S < A L A R M R E S E T > T O E S C A P E
0 1 / 1 1 / 9 9
M A N U A L B A T T E R Y T E S T
1 6 : 5 2 : 1 1
L A S T T E S T R E S U L T S
D A T E & T I M E =
0 1 / 1 0 / 9 9 1 5 : 3 0 : 0 0
L A S T E D =
1 : 0 0
R E S U L T = T E S T P A S S E D
M A X B A T T A M P S =
4 0
A V G B A T T A M P S =
3 8
M I N B A T T V O L T S =
2 4 8
S T A R T / M I N % =
1 0 0 / 9 2
0 ) S T O P
1 ) S T A R T 2 ) C H A N G E D U R A T I O N = 1 M I N .
S E L E C T I O N :
