4 Using the device
4.1 Turning the device on/off
Switch on the device: Press and hold on the
2 seconds
then you will hear a beep sound.
Switch off the device: Press and hold on the
3 seconds
then you will hear a beep sound.
4.2 Adjusting the volume
To increase the volume, press the Up
▲
button. And press
the Down
▼
button to decrease the volume.
Note:
The volume level is display on the screen.
4.3 Low Battery Indication
The device can detect the low battery level when the battery
voltage goes low. When battery voltage is low, the battery
icon will flash and a beep will be heard to indicate that the
batteries need to be replaced.
4.4 Receiving/transmitting communications:
The devices are in “Reception” mode when it is turned ON
and no transmitting. When a signal is received on the current
channel, the LCD will display in reception.
When you press the TALK (push to talk) button, the devices
switches to “Transmission” mode.
Hold the device in a vertical position with the microphone
3-5cm away from your mouth. While holding the TALK
button, speak into the microphone in a normal tone of voice.
Release the TALK button when you have finished transmitting.
For others to receive your transmission, they must be on
the same channel with you.
Note:
1, The talking range will depend on your surroundings
and environment. It will be affected by obstructions such
as hills or buildings.
2, Don’t try to use two devices which are less than 1.5m
(5 feets) apart. Otherwise, you may experience interference.
