HT 7330100000
INFRARED THERMOMETER KC-180B-1
Page - 1
INFRARED THERMOMETER KC-180B
Introduction:
KC-180B-1 handheld Infrared thermometer is a non-contact temperature
measuring instrument using laser and infrared technology. You could use this product to
measure the surface temperature of objects, which are not suitable for traditional
contact measuring (such as moving objects, charged objects, toxic objects and hard-to-
reach objects).
The unit employs low consumption design and is capable to save the pre-set data
automatically, avoiding resetting it after restart. The product features a LCD with
backlight, holding the readings automatically and a laser pointer for accurate aiming. It
has the advantages of rapid measuring, easy and safe operation and portability. It is
widely used for applications as finding the hot spot of electric connections and bearings,
measuring the temperature of high frequency induction heated objects, monitoring food
processing and storage, inspecting temperatures of heat & refrigeration system,
inspecting temperature for technics control in metallurgy industry, inspecting
temperature during laying asphalt and fire-control process, or other circumstances in
which the temperature field to be measured is not allowed to be compromised. It is an
essential measuring instrument for the metallurgical industry, the electric power plants,
the chemical industry, the rubber industry, the spinning and weaving industry, the
plastic industry, the papermaking and the food processing. The product KC-180B-1
provides a type K-thermocouple input socket, which makes it possible to measure wider
temperature range.
KC-180B-1 Infrared thermometer is a Class II laser product and in compliance with the safety standard EN60825-1.
Safety Introductions
Fail to follow the instructions listed below may cause personal injury.
●Read and understand all instructions prior to any operation.
●Do not remove any labels from the tool.
●Do not operate the tool in the presence of flammable/explosive gases.
●Do not operate the laser tool around children or allow children to operate the
laser tool, failure to do so will injure
children’s eyes.
●Do not stare into the laser beam.
●Do not project the laser beam directly into eyes of others.
●Do not set up the tool at eye level or operate the tool on or near a reflective surface, as the l
aser could be projected into
people’s eyes.
●Do not observe the laser beam by using optical tools such as binoculars, magnifying glasses.
●To avoid burning risk, please be advised that the readings of reflective objects may be lower than the actual tempe
rature.
Battery Safety Instructions
●Please remove the batteries when clean the product.
●Remove the batteries before long term storage
●Please install the batteries properly as the instructions of the positive and negative charges
●Please dispose th
e batteries properly. High temperature will cause explosions and do not burn the batteries. Strap
insulated tape around the battery charges to avoid unsafe contacts with other objects. Many countries have regulations
regarding battery disposal.Please follow the local regulations of battery disposing.
