MEI Cashflow SC83 Series, Руководство по установке и эксплуатации

Страница: 16 / 30

MEI CASHFLOW SC83 Page-16
www.meigroup.com Part # 252055088 G6
UPDATING SOFTWARE
There are two ways of updating the software of a Cashflow SC83
®
note acceptor.*
1) Via a hand held device called the Cashflow
®
Portable Programming Module (PPM).
2) By replacing the programmed PROM (Chip Change).*
Portable Programming Module
C onnecting the PPM to the CASHFLOW SC83
®
1. Locate the two USB ports located on the top of the Portable
Programming Module (See fig. 1 below).
2. Plug the type A end of your USB harness to the USB type A
port of the
PPM . Plug the type B end of the same USB harness
into the USB type B port of the Cashflow SC83
®
. (see fig.2).
fig.2
download button
fig.1 (CPM)
Type A USB port Type B USB port
*Note: Once a PROM (chip) is installed, the note acceptor can no longer be programmed via the programming
module (PPM). Installation of a PROM will disable the ability of the programing module (PPM) to communicate with
the note acceptor. Future software changes can only be made by replacing the PROM (chip change).