11
You must install the Dual Camera Driver
from the Digital Camera CD before
connecting in order for your computer to
function properly using the USB. See the
section, “Installing Software” on page 13
for details on how to install the driver.
The USB Port is located in the Digital
Interface Compartment on the left side of
the camera.
• Step 1
Connect
the smaller end of
the USB cable into
the USB port of
your digital
camera.
• Step 2
Connect the
other end of the USB
cable to the USB port
located on the back of
your computer.
Hooking Up to Your TV/
VCR
Connect your camera to a television set if
you want to have a larger view of your
photos.
To view your images on television
set:
• Step 1
Press the
Power
button to
turn your camera on. Wait for the
indicator light to signal that the camera is
ready.
• Step 2
Press
Menu button
to
bring up the camera’s menu screen.
• Step 3
Press
OK
on the
Setup
option.
• Step 4
Press
to move down the
menu until the
TV Mode
option is
highlighted and select the TV standard
that use in your country (NTSC/PAL).
Press
Move to
Exit
to exit the menu.
• Step 5
Connect
one end of the
video output
cable (the black
colored plug)
into the video
out port located
in the Digital
Interface
Compartment on
the left side of the camera.
• Step 6
Connect the
other end of the video
output cable (the
yellow plug) to the
video in plug on your
TV/VCR.
Note:
TV/VCR manufactures vary.
Locate the audio/video ports on your
individual TV/VCR and insert the video
output connector into the Video port.
• Step 7
Turn on your TV and VCR.
• Step 8
On your television, select the
channel for auxiliary video input (not Ch
or 4).
