Megger TORKEL 910, Руководство пользователя

Страница: 14 / 52

14
TORKEL 900-SERiES ZP-CS01E CS033663DE
4 MENU SYSTEM
4
M
enu system
4.1 Main menu
Screen buttons
Confirm
Exit without changes
Run
Pause the test to make any cor-
rections/changes in the settings*
)
Stop
Temperature compensation
Shown when compensation is
enabled
Quick guide
Open test file library
New test
Test configuration
information bar
Shows messages and is used for
acknowledge alarms
information field
Shows voltage and current
*
)
The pause time has limitations regulated by inter-
national standards. if the pause time is too long the
battery may have to be recharged before a new test is
done.
TEST menu
Test method
A test can be made in six test methods, "Constant i"
is default.
1]
Press the button and select test method.
▪
Constant i (current)
▪
Constant P (power)
▪
Constant R (resistance)
▪
Profile i (current profile)
▪
Profile P (power profile)
▪
V Logger (Current with monitoring during charge)
A]
For Constant I, P or R you press the numeric
field and make the settings for the parameter
using the On-screen keyboard or the control
knob.
B]
For Profile I or Profile P a new tab will be
shown on top of the screen together with a
window for the settings.
Here you configure your profile and press to
start the test or press TEST to return to the test menu.
C]
For V Logger the voltage will be logged dur-
ing charge. You can set time values for warn-
ing and stop.
Warning and stop limit parameters
You can set TORKEL to issue a warning and/or to stop:
▪
When the voltage has reached a certain level.
▪
When a certain amount of capacity is discharged.
▪
After a specified time.
▪
When a cell voltage has reached a certain level (if BVM is
used, see section "9.2 BVM - Battery Voltage Monitor" on
page 37).