Megger MIT415, Руководство пользователя

Страница: 13 / 14

REPAIR AND WARRANTY
The instrument circuit contains static sensitive devices, and care must be taken
in handling the printed circuit board. If the protection of an instrument has
been impaired it should not be used, and be sent for repair by suitably trained
and qualified personnel. The protection is likely to be impaired if, for example,
the instrument shows visible damage, fails to perform the intended measure-
ments, has been subjected to prolonged storage under unfavourable conditions,
or has been exposed to severe transport stresses.
New Instruments are Guaranteed for 3 Years from the
Date of Purchase by the User
Note:
Any unauthorized prior repair or adjustment will automatically
invalidate the Warranty.
Instrument Repair and Spare Parts
For service requirements for Megger
®
Instruments contact :-
Megger Limited or Megger
Archcliffe Road Valley Forge Corporate Center
Dover 2621 Van Buren Avenue
Kent, CT17 9EN Norristown, PA 19403
England U.S.A.
Tel: +44 (0) 1304 502243 Tel: +1 (610) 676-8579
Fax: +44 (0) 1304 207342 Fax: +1 (610) 676-8625
or an approved repair company.
Returning an Instrument for Repair
If it is necessary to retun an instrument for repair, a Returns Authorisation
number must first be obtained by contacting one of the addresses shown.
You will be asked to provide key information, such as the instrument serial
number and fault reported when the number is issued. This will enable the
Service Department to prepare in advance for the receipt of your instrument,
and to provide the best possible service to you.
The Returns Authorisation number should be clearly marked on the outside
of the product packaging, and on any related correspondence. The
instrument should be sent, freight paid to the appropriate address. If
appropriate a copies of the original purchase invoice and of the packing note,
should be sent simultaneously by airmail to expedite clearance through
customs.
For instruments requiring repair outside the warranty period a repair
estimate will be submitted to the sender, if required, before work on the
instrument commences.
Approved Repair Companies
Megger operates fully traceable repair and calibration facilities complemented
by a network of approved repair and calibration companies, to offer excellent
in-service care for your Megger products. Megger’s streamlined Returns
Authorization system ensures your product is expected and enables you to
track its progress on-line.