11
12
RADIO
When in playback mode, a 2-second press on
will put the player in radio mode
(player will chime). The radio will begin to play from the last band used and the last
frequency set.
If already in Radio mode, a click on
will cycle through the 3 bands available: FM, AM
and SW.
While in Radio mode the Radio screen is displayed.
Click
or
to decrease/increase the frequency by a pre-set value for the current
band. A 2-second press will scan for the previous/next station of the current band. The
frequency display will update as it changes.
When the scan reaches the beginning/end of the band’s frequency range the player
will chime. An additional click will loop and continue the scan from the beginning/end
respectively. To stop an active scan , click on
,
or
.
The
buttons may be pre-programmed with individual default frequencies
per band. A click on each will tune the radio to the setting for that button. A 2-second
press will set (or reset) that button to the current frequency.
When the frequency is tuned to one of the programmable buttons (
), that
button’s symbol will be displayed on the screen.
See Radio Band Spacing Screen for details.
FM: 64.0-108.0 MHz, AM: 520-1720 kHz, SW: 2300-26100 kHz
While scanning is active, you cannot change mode or turn the player off.