Megatherm MPB 60, Инструкция по установке и эксплуатации

Страница: 20 / 25

Megatherm wood-pellet burner MPB serie's
“ ignition ”. By pressing the button “ MODE / “ changes the operation from
“ Ignition ” to “ Automatic ”.
4. In “Automatic mode”, starts the operation of the burner.
5. When the photo sensors detects fire, then the burner starts its “Work” by increasing
its power gradually to the power it has been set (i.e 30kW)
6. When the boiler's water temperature reaches the desired temperature “HEATING
WATER TEMPERATURE “, the the power of the burner goes down ta 3kW ( Maintain
mode )
7. The burner works at “Maintain mode” till the boiler's water temperature goes down
to the temperature:
“HEATING WATER TEMPERATURE - CH FURNACE HYSTERESIS”
14. Stop of the burner
1. The burner can be either at “ Work ” or “ Maintain ” or “ standby ”
2. Press the button “ MODE / “ continuously till “ STOP MODE ” appears on the
screen.
3. It is written “
Burning off ” till the photo sensor stops to detect fire (3-5 min)
4. When he photo sensor stops to detect fire, “cleaning procedure takes place for few
seconds.
15. Cleaning burner's chamber
1. The burner can be either at “ Work ” or “ Maintain ” or “ standby ”
2. Press the button “ MODE / “ continuously till “ STOP MODE ” appears on the screen.
3. It is written “ Burning off ” till the photo sensor stops to detect fire (3-5 min)
4. When he photo sensor stops to detect fire, “cleaning procedure takes place for few
seconds.
5. When “
Stop ” appears on the LCD screen, waiting few minutes till the burner cools
down.
6. Open the boilers door, clean the burners tube and close back the door.
7. By pressing the button “
MODE / “ once changes the operation from “ Stop ” to
20
CH:39.5 C WUW:23.6 C
IGNITION...
CH temperature WUW temperature
Burner function