Main features
1. In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 100
Base-TX, IEEE802.3z, IEEE802.3abstandard.
2. Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and
4-way associative hash algorithm.
3. Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
4. Automatic identification of MDI/MDI-X cross line.
5. In conformity to safety code of FCC and 15 CLASS A and CE MARK.
Technical parameters:
1. Standard Protocol: IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX and IEEE802.3z standard
2. Connector: one UTPRJ-45 connector, one SC/ST connector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
Adapter (External): 100-265V AC input, DC5V 1A output
5. Environmental temperature: 0
℃
- 50
℃
6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9.
The SFP slot supports 1.25G
Transfers and optical fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode: 8.3/125, 8.7/125, 9/125 or 10/125μm
10 Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 140mm(L) x 110mm(W)x 29mm(H)
Cautions:
1. This product is suitable for indoor application.
2. Put it under the dust cover when not used.
3. It is forbidden to stare at the TX fiber-transfer end with naked eyes.
4. WDM transceiver must be used in pair.
Trouble shooting:
1. Device is not matched. Please select the corresponding network device according to
the transfer rate of the product (10Mbps or 100Mbps, 1000Mbps) when connected to
other network devices (network card, hub, switch).
2. Line loss is excessive during the fiber wiring. Excessive loss in connector plug-in
and fiber soldering, and excessive intermediate nodes may cause excessive loss rate or
abnormal operation.
