MegaTec NetFeeler 2, Руководство пользователя

Страница: 19 / 22

Settings
NetFeeler 2
15
5.5. How to set InfraRed Beam Detector
InfraRed Beam Detector can be installed on a fence, door,
window, access way, corridor, balcony or where access
detection is required. If the InfraRed Beam is interrupted, the
detector will sound an alarm and send a signal to
NetFeeler 2 .
Note: An external 9~12V power input is required.
To setup:
1. Hold both caps (black) on the InfraRed Beam detector and
pull in opposite direction to reveal the DIP switch (see Fig.
9.).
2. Locate DIPs number 1 to 8 and set to “+ + - - - - - -“
3. The next set of DIP switch on the right is labeled in reverse
from 13 to 10. Set these from RIGHT to LEFT “- - + +”