Megasat SAT-IP Server 3, Быстрое руководство, Страница: 19 / 28

05
ENGLISH
2. Connection & How to access
Connection with a Universal LNB (z.B. Single, Twin or Quad LNB)
Single LNB = RF4
Twin LNB = RF3 + RF4
Quad LNB = RF1 + RF2 + RF3 + RF4 (The order is not important)
Connection with a Quattro LNB
The device must be connected to the appropriate connector on the Quattro LNB, please
make sure the correct ports on the LNB:
Tuner RF1 = Horizontal High (HL)
Tuner RF2 = Horizontal Low (HH)
Tuner RF3 = Vertical High (VH)
Tuner RF4 = Vertical Low (VL)
Connection with a Unicable LNB
Unicable LNB = RF4
Note that a change must be made in the web configurator.
Connection with a Jess LNB
Unicable LNB = RF4
Note that a change must be made in the web configurator.
Connection with a DiSEqC controlled device
Depending on the connection used, please refer to the corresponding DiSEqC settings.
Connection with a Motor (USALS)
Motor (USALS) = RF4
Note that a change must be made in the web configurator.
Attention:
If you use DISEqC, JESS or other additional circuitry, you can use only up to 4 Clients.
VL
(RF 4)
VH
(RF 3)
HH
(RF 2)
HL
(RF 1)
Factory default LAN Power
supply
Reset button