Megasat HD570, Руководство пользователя, Страница: 28 / 35

- 11 -
2.2 Satellite List
Move cursor to “Satellite List” and press [OK] button to enter in its submenu. Use
[
Ÿ
/
ź
] buttons to choose satellite.
z
Edit: Press [RED] button to edit satellite. Please operate according to screen. Use
[RED] button to shift alpha between capitalized and small. Use [GREEN] button to
delete input. Use [YELLOW] button to confirm editor. Press [BLUE] button to cancel
editor.
z
Add: Press [GREEN] button add a satellite. Please operate according to chapter
“Edit”.
z
Delete: Use [
Ÿ
/
ź
] buttons to select satellite and [OK] button to confirm selection.
Press [BLUE] to delete the selected satellite. Press [EXIT] button to quit and save
according
to screen.
2.3 Antenna Setup
Move cursor to “Antenna Setup” and press [OK] button to enter in its submenu. Use
[
Ÿ
/
ź
] buttons to select item and [
Ż
/
Ź
] buttons to change parameters. Signal Intensity
and Signal Quality will be displayed at bottom of the window.
Fixed Antenna
z
Satellite: Choose a satellite.
z
LNB Freq: Press [OK] button to select a proper LNB Frequency.
z
Transponder: Press [OK] button to select a transponder.
z
DiSEqC1.0: Press [OK] button to select a digital control port.
z
22K
˖
Use [
Ż
/
Ź
] buttons to activate or deactivate 22K Hz tone switch.
z
Polarity: Use [
Ż
/
Ź
] buttons to choose a polarity voltage: Auto, H (horizontal) and
V(vertical).
Motor Antenna
z
LNB Type: Press [OK] button to select a proper LNB Frequency.
z
Motor Type: Use [
Ż
/
Ź
] buttons to select “USALS” or “DisEqC1.2”.
z
Local Longitude: Use [
Ż
/
Ź
] buttons to select “E” or “W” and numeric buttons to
input. (It is only activated when “Motor Type” in “USALS” mode.)
z
Local Latitude: Use [
Ż
/
Ź
] buttons to select “S” or “N” and numeric buttons to input.
(It is only activated when “Motor Type” in “USALS” mode.)
z
Delete All: Delete all LNB information.
z
Motor Setting
A.
Satellite: Choose a satellite.
B. Transponder: Press [OK] button to select a transponder.
C. Position No. & Save: Use [
Ż
/
Ź
] buttons to choose NO. for satellite and
transponder.
D. Go-To-X: Press [OK] button to choose position of satellite.
E. Save: Use [
Ż
/
Ź
] buttons to move position of the motor antenna to West or
East, operate according to signal quality and press [OK] button to save.
F. Recalculation: Update related information of automatic localizer.
z
Limit Setup
A.
Limit Setup: Use [
Ż
/
Ź
] buttons to choose limit setup mode: Disable/West
Limit/East Limit.
B. Limit Setup: Long press [
Ż
/
Ź
] buttons to move motor antenna.
C. Go to Reference: Press [OK] button to go back to default position.