Operation
ENGLISH
10
To access the menu, press MENU and select [Search Channel]. The Menu provides options to
adjust the Search Channel settings. Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu
Satellite setting
Configure the settings of satellites.
Satellite list: Press Up/Down to select a satellite, whose settings will be shown at right side.
LNB-Typ: Press LEFT/RIGHT/OK to show the list of LNB Types which is shown as frequencies of local
oscillator. You also can enter frequency by User Single, User Dual at bottom of the list.
LNB-Power: Press LEFT/RIGHT to set the LNB power.
22K: Press Left/Right to switch on or off the 22K,which is set with auto when LNB Type is dual local
oscillator.
Toneburst: Enable or Disable the toneburst switcher.
DiSEqC1.0: select the right port up to 4 for the right LNB.
DiSEqC1.1: select the right port up to 16 for the right LNB.
Motor: LEFT/RIGHT to select DiSEqC1.2 or DiSEqC1.3. Then Press OK to show the menu to set po-
sition.
DiSEqC1.2: Move the motor to a right position to lock the signal.
Installation
