Megasat HD 720 plus, Руководство пользователя

Страница: 36 / 48

12
ENGLISH
4. Main Menu
Antenna Setting „Motor Antenna“
LNB Frequency:
Please enter the LNB frequency. The default Universal (9750-10600) is true in most cases.
Motor Type:
Choose between the options DiSEqC 1.2 and 1.3 (USALS). If you select DiSEqC 1.2, the
options „Local Longitude“ and „local width“ as non-labeled (gray). If you select USALS,
„Delete All“ is greyed out.
Local length / Local width:
Here you can manually assign the latitude and longitude of the satellite.
Delete all:
By pressing the OK button, the window will appear with the question: „Do you really
want delete the selected satellite position of this set-top box?“ Confirm your selection
with „YES“, all the data of the satellite settings are deleted.
Motor Setting:
Press the OK button, then appear the window with the motor controller:
Satellit:
Select with the t u buttons the desired satellite or press the OK but-
ton to display an overview. Then select the satellite from the list and press OK.
Transponder:
Follow the instructions in the previous option.
Position number & Save:
the permissible range is 0-63. „0“ refers to the original
position.
Go to X:
the list is displayed by pressing the OK button, select the correct position
(the recommended or 1-63).
West <Save> Eastern:
Rotate the antenna with the < westward, with the button > to the east. By pres-
sing the OK button, a window with the question appears: „Do you want to ch-
ange this satellite position?“. To save the current position, press the OK but-
ton on YES option. To remove the location, press the OK button on NO option.
Recalculation:
press the OK button, a window with the question appears:: „Do you
want to change this satellite position?“. To recalculate press the OK button on the
YES option.