Megasat HD 601 V2, Руководство пользователя, Страница: 37 / 52

11
ENGLISH
Motor
Use the
t u
buttons to select the control of your motor. If you enable this option and
then press OK, you can make further adjustments to the position of the mirror adjust:
LNB Power
Here you need to check the LNB power according to your antenna, set the correct
frequency or define yourself. The default setting (13V/18V) is true in most cases.
22KHz
In case you are using two antennas connected to a 22KHz tone switch box. You can
supply either 22KHz by setting “OFF” to select antenna.
DiSEqC 1.0 / DiSEqC 1.1
If you connect antenna to DiSEqC Switch, you need to specify the DiSEqC input to which
your selected satellite have been configured.
4. Main Menu
Move Auto [W/E]
Press RIGHT/LEFT button, the dish will be motorized to East/West continuously, it will
stop until it find the best signal.
Move Continue
Press RIGHT/LEFT button, the dish will be motorized to East/West continuously until you
press LEFT/RIGHT again.
Move Step
Press RIGHT/LEFT button, the dish will be motorized to East/West by step.
Store Position
Save the current position you searched for the selected satellite.
Go to Position
Press OK button to move the dish to the stored position.
Go to Reference
Press OK button to move the dish to 0 position.
Set West Limit
Enable West limit.
Set East Limit
Enable East limit.
Disable Limit
Disable West limit and East limit.