ENGLISH
07
2. Operating instruction
Funktion
Description
Operation
“Satellite” light
After the satellite selection, “Home Status” light will go off
and the LED light of the selected satellite will start flashing.
Once selected satellite has been found, the LED light of
the satellite will become solid.
Function
Description
Operation
“Power” Switch
When the all cable connections are completed,
switch on with the “Power Switch” button on the
top of the controller.
„Home Status“ light
Stand By „ON“
If the antenna was at home position, “Home status” light
will be solid on to show it is ready to use.
„Home Status“
light Flashing
Turning into „ON“
If the antenna was not in the home position, “Home status”
light will flash, and the antenna will return to the home
position within a maximum 2 minutes. Then will be solid on.
Functional Description
The “Home position” means antenna completely folded down to the body part which is
the basic position for functioning.
A
Power On
ON
OFF
B
Selecting the satellite
C
Satellit suchen
Funktion
Description
Operation
““Satellite
CCW / CW button”
Light”
“OK” button
Once antenna and controller are connected, you can
select & change the satellite as you desire.
Select the preferring satellite using the “CCW / CW”
buttons, then press the “OK” button to accept the setting.
If you select the wrong satellite, you can re-search target
satellite using the “CCW / CW” button, then press the “OK”
button to accept the new setting.
