Megasat Classic, Руководство пользователя

Страница: 6 / 11

ENGLISH ENGLISH
10 11
LCD Display Inbetriebnahme
Wählen Sie die für Ihre Ausführung zutreffende Spalte und folgen Sie den Anweisungen. The LCD display shows the current status of the automated search system.
(applies to Satmaster Portable Premium and Professional)
Elevation und Azimuth
use the „high“ - and „down“ - the keys to adjust the azi-
muth or elevation angle.
Elevation angles are set from 20 degree to 70 degrees. Fac-
tory setting will be 50 degrees. After the first settings have
been activated they will be automatically memorized. There
is no need to reset as long as you remain in the same loca-
tion.
Satmaster Portable Classic
Turn on the TV and Settop box.
Setting the set-top box options to watching TV. (Refer to Subscriber’s Manual of your settop box.)
Turn on the power inserter
Select the desired satellite using the „up“ - and „down“ buttons.
Then press the „Set“ button to accept the setting.
A few seconds later the „elevation angle menu“ on the LCD.
Choose an appropriate elevation with the „up“ - and „down“ buttons.
Then press the „Set“ button to accept the setting.
Wait until your antenna has finished scanning and positioning
(about one minute).
After commissioning, you must turn off the power supply so that you can
receive all TV programs easily. (Do not remove the input cable between
antenna and receiver.)
Example Screen (Satellite Selection)
Example (Parking position)
Example Screen (Elevation Selection)
After positioning is completed the TV reception is automatically started and you receive a TV signal. If you get no TV,
check all connections and settings (Receiver, Portable and Satmaster TV) and follow the above steps again.
If you want to stop using the Portable Satmaster or bring the antenna for transport into the park position, connect the
power supply (if you removed it) and turn from the IDU or the Einspeisebox and again. The antenna is automatically
returned to the park position. The elevation drops and rotates the base unit to the antenna off in the park position. This
process takes about one minute.
Wait 10 seconds to start the automatic search with the last setting.
To change the setting or manual search, press any key.
Did you press a button, the satellite name appears on the LCD. If not, the
antenna is now investigating the pre-satellite and you can skip the next
6 steps.
Did you press a button, the scan
starts now. Otherwise, wait 10 se-
conds before the scan starts auto-
matically. Wait until the antenna
and the positioning of your search
has ended. (about one minute).
Turn on the IDU
Satmaster Portable Premium Satmaster Portable Professional
ASTRA1
19.2E
H POL,
SELECTED
SIGNAL
DETECTED
V POL,
SELECTED
NIT
DETECTED
SIGNAL
LOST.
CHECK
STB CBL.
EL 30DEG
18V from set-top-box
13V from set-top-box
Not connected to receiver. Check the
supply cable to the STB-1 connection.
Can not find a satellite signal.
Check the orientation of the antenna.
Confirmed that the signal from the
target satellite is correct
Satellite signal is found