OMNIS AV Monitoring System - USER GUIDE
iv
FCC Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy. If the equipment is not installed and
used as directed in the instruction manual, it may cause harmful interference to radio communications. It is
the responsibility of the user to correct any interference.
Carrying and Handling the Equipment
Before you handle the OMNIS, disconnect all cables and cords. Do not operate the OMNIS in areas with
significant amounts of airborne dust or smoke, or near a humidifier. Tiny airborne particles can damage the
equipment.
Liquid Exposure
Keep the OMNIS away from all sources of liquid. Protect equipment from dampness, humidity, or wet weather,
such as rain, snow, and fog.
Power
Unplug the power cord (by pulling the connector, not the cord) and disconnect all other cables if any of the
following conditions exist:
▪
The power cord or plug becomes frayed or otherwise damaged.
▪
Liquid has spilled onto the equipment.
▪
The equipment is exposed to rain or excess moisture or humidity.
▪
The equipment has been dropped, and has been damaged.
▪
You suspect that the equipment needs service or repair.
▪
You want to clean the case (use only the recommended procedure, described later in this document).
IMPORTANT:
The only way to completely turn off power is to unplug the power cord.
WARNING:
The AC cord has a three-wire grounding connector. This connector fits only a
grounded AC outlet. If you are unable to insert the connector into an outlet because the outlet
isn’t grounded, contact a licensed electrician to replace the outlet with a properly grounded one.
Do not defeat the purpose of the grounding pin.
