Megapix DWC-PZV2M72T, Руководство пользователя

Страница: 9 / 35

1. Using the torx wrench included, remove the dome
cover from the camera module by loosening the
screws on the dome.
2. Using the mounting template sheet or the camera
itself, mark and drill the necessary holes in the wall or
ceiling.
3. Pass wires through and make connections.
4. Secure the camera module to the mounting surface
using four screws.
5. The cameras offer a motorized lens adjustment per
sensor from the camera’s web viewer. See page 17.
6. Assemble the dome cover over the camera body.
7. Remove the protective film from the camera's dome.
9
INSTALLATION*
To use the LAN water protector case, refer to the
diagram below:
1. Insert the network cable into (a), the camera’s
network port.
2. Connect (b) to the camera’s network port by
rotating it clock-wise until tight.
3. To complete the water-proof installation, connect
part (c) to the case’s body, securing tightly by
rotating it clock-wise.
U s i n g C a b l e W e a t h e r P r o t e c t o r
E a s y C a m e r a I n s t a l l a t i o n