31
Electric connection
Before connecting the machine to the power supply, check that the voltage on the rating
plate matches the existing voltage. Normally the voltage is
220–240 V
~
50 Hz. The machine
has to be connected to a socket outlet with earth contact.
OPERATION
Start the machine using the power switch on the left side of the machine.
Display and control panel
ATTENTION:
Push the buttons only with your fingers not with the pliers or other sharp ob-
jects.
Distance from wheel to balancer (A)
Rim width (B)
Rim diameter (D)
Balance mode selection
Unbalance value recalculation and self-calibration
