IMPORTANT
This guide contains important warnings.
Disclaimer
User / buyer is expected to read and understand the information on this manual, to comply with all the precautions
and instructions and retain this manual for future use.
Failure to comply with these instructions can lead to personal injury or property damage.
TECHNICAL INFORMATION
Material:
Heavy-duty die casting aluminum body & zinc plated steel tube
Tank:
60-200 l
Dispensing:
1 l per stroke
Application:
Low viscosity fluids such as diesel, kerosene, fuel oils and machine oils, etc
Temperature:
60 °C (140 °F)
Suction tube length
1 000 mm (40 in.)
ATTENTION: Ensure before using that the gear case is filled with oil.
SAFETY WARNINGS AND PRECAUTIONS
ATTENTION: It is the responsibility of the user to operate the pump in secure environment for dispensing liquids.
Pump container should be grounded when using flammable liquids to avoid static electricity. Pump should be
cleaned before using since processing lubricants could contaminate the fluid.
When using the hand pump (especially when pumping chemical liquids) follow all the safety warnings by
European Chemicals Agency (ECHA).
MISUSE HAZARDS
•
Do not use the equipment when fatigued or under the influence of drugs or alcohol
•
Use only liquids and solvents compatible to this equipment. Read all the manufacturers warnings of the
liquids or solvents. For complete information on the material, obtain a MSDS from your dealer or retailer.
•
Do not modify or alter the equipment
•
Use equipment only for its intended purpose
PERSONAL PROTECTIVE EQUIPMENT
Always wear safety glasses or face shield when operating the pump, especially while working with
hazardous substances.
SAFETY WARNINGS
•
Keep the work area clean and well illuminated. Cluttered areas invite injury.
•
Extreme caution is necessary when any appliance is used in the vicinity of children, invalids or
elderly people. Children or people with a disability cannot use the device. Keep children away
from the unit.
•
Store unused equipment. Unused tools must be stored in a dry location to prevent rust. Always lock the
EN
6