5
Main Power Connection
Caution!
1.
Do not connect power supply to a dimmer system.
2.
This unit has Auto switching power supply. It will respond to 110V or 220V automatically
The occupation of the connection-cable is as follows:
DMX-512 Connection
This fixture is equipped with an electronic power supply that will let the unit operate from 100V to 240V from 50Hz to
The fixture is equipped with 3 Screw binding post for DMX output. Only use a shielded twisted pair cable designed for
RS-485 and 3 pin XLR plugs and connectors in order to connect the controller with the fixture.
Caution!
At the last fixture the DMX signal needs to be terminated with a terminator. Solder a
120 Ohm resistor between the (-) and the (+) signal into a 3 pin XLR plug and plug it
in to the last fixture on the signal run. Pre-manufactured terminator plugs are availa-
ble for purchase from your Mega-Lite dealer (P-DMXT).
Cable
Pin
110V
Brown
Light Blue
Live
Neutral
L
N
220V
L
L
L
N
110V—Connection
L
L
220V—Connection
1
2
3
DMX—output
GND =Shield= 1
D- =Signal (-)= 2
D+ =Signal (+)= 3
1
2
3
4
5
4. N/A
5. N/A
Содержание XWITCH
Страница 2: ......
